Buhnen HB 5010, Перевод оригинального руководства по эксплуатации

Страница: 34 / 142

Programming
26
6.3.2.4 System
Password ****
Operation:00098h
Display: 3.0
Power : 3.0
Figure 6.3.2.4/1: “System”
You can change the password for menu level 2 here. In addition, the following system
data is displayed:
• Number of operating hours (“Operation”)
• Version number of display electronics (“Display”)
• Version of power electronics (“Power”)
The factory defined password for Level 2 is “1234.” Carry out the following steps to enter a
new password:
1. As soon as the menu looks like the one displayed in Figure 6.3.1.3/1, press “Enter.”
2. You will be prompted to enter the old password (“Old Password”).
3. Set the first digit of the old password using the “Up/Down Arrow.” Press “Enter” to
confirm the set digit. The cursor will move to the next digit. Enter the remaining digits
in the same manner.
4. You will then be prompted to enter the new password. Enter the new password as
described in Step 3.
5. After confirming the last digit with Enter, the new password becomes effective imme-
diately.
6.3.2.5 Load factory settings
Factory set up
Loading
Confirm with Enter
Figure 6.3.2.5/1: “Load factory settings“
Use this menu item to set the parameters back to the delivery condition. All stored switch-
ing times will be lost.
After confirming with “Enter”, the factory settings will be loaded.