Buhnen HB 5010, Перевод оригинального руководства по эксплуатации

Страница: 29 / 142

Programming
21
6 Programming
6.1 Introduction
The entire HB 5010 tank system programming is done using a clearly structured menu.
The required messages and entries are depicted in a four-line display in plain text. Re-
lated functions are consolidated in one menu item each and can be quickly accessed.
To prevent faulty operation, the programming has been divided into three levels that are
protected by a password in part:
Level 1 (User)
The menu items of Level 1 can be accessed without a password. Here
• Individual hoses and manual units (pistols) can be turned on and off
• The operating mode (manual/time-controlled) and the
• Display language can be selected
The default password for Level 2 is: „
1234 “.
Level 2 (Master)
Level 2 is protected by a (freely selectable) password. The following settings can be made
here:
• Temperature pre-selection for all components (tank, pump, hoses, manual application
units)
• Turning on and off and standby times, individually for each weekday
• System date and time
• General system data (operating hours, software and hardware versions) can be dis-
played.
• Resetting all settings to factory settings
The password for Level 3 is: „
9744
“.
Level 3 (only for trained Service Personnel)
Danger!
The password-protected parameters of Level 3 have a main impact on the operating
safety and the operating behavior of the entire tank system. Wrong and/or improper en-
tries can lead to unpredictable operating behavior, damage to the unit or the processed
materials. For the above reason, these parameters may only be changed by espe-
cially trained personnel!
Level 3 is protected by a non-changeable password. System-oriented parameters may be
set here, such as
• Temperature limit values
• Operating mode of pump
• Temperature unit (Celsius/Fahrenheit)
• Selection of utilized temperature sensors
• Controller parameters
Figure 6.1/1 offers an overview of the menu structure: