manualshive.com logo in svg

Buffalo terastation 3000, Руководство пользователя

Поделиться
Скачать
Buffalo terastation 3000 Скачать руководство пользователя страница 79

Drive Replacement

Drives in the TeraStation show a blue status LED during normal operation. If a drive fails, its error LED will glow red.

2

1

2

1

1 

Error LED
Glows red if a drive has failed.

2 

Status LEDs
The failed drive’s status LED will be glowing a steady red. A drive with a red status LED is ready to hot-swap.

Notes: 

•  Do not unplug a drive whose status LED is green instead of red. Dismount it first or shut down the TeraStation 

before swapping a working drive. If you remove the drive without properly dismounting it, data may be lost or 
the TeraStation may malfunction.

•  For the replacement drive, use a Buffalo OP-HDS series drive of the same size or larger (the same size if using 

RMM). If a larger drive is used, the extra space will not be usable in a RAID array.

•  To avoid damaging the TeraStation with static electricity, ground yourself by touching something made of metal 

before handling any sensitive electronic parts.

•  After a drive is replaced, it will take about 30 minutes before normal file reading and writing are restored. Settings 

may not be accessible during this period.

•  Do not change the order of the drives in the TeraStation. For example, pulling out drive 1 and replacing it with 

drive 2 may cause data to be corrupted or lost.

•  If the LCD panel does not change after a new drive is installed, click 

Rediscover Disk

 in Settings.

78

Содержание terastation 3000









































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды