Buffalo Surveillance Server, Руководство администратора

Страница: 256 / 404

Buffalo Surveillance Server 256
Tracked and managed by the Information Repository. This is known as unloading to off-
line status. As long as media is tracked, its Vault catalog remains on the Vault in which
the media normally resides. It also appears in
Vault Admin (denoted as off-line), and
its files and metadata are searchable.
Not tracked by the Information Repository.
The process of unloading media is identical for hard disk media and tape media with one
exception. On tape media you can either leave the media inside the storage library or remove it
from the Information Repository entirely. Stand-alone tape drive-based Vaults work the same as
tape library-based Vaults.
When executing Vault and media operations, the Buffalo Surveillance Server may appear
as if it is not responding. However, when the Buffalo Surveillance Server completes its
given task, it responds normally.
Follow the steps below to unload media.
From the left frame of the Vault Admin main window, click in front of the Vault from
which you want to remove media.
Click in front of the Vault's Media icon to open the media list.
Click (and highlight) the media unit that you want to unload.
Click in the Vault Admin tool bar . The Unload Media window will appear.
Use the Media Tracking pull-down list, and select one of the options available:
Media Tracking Options Required Input and Results
Track media after
unloading
Enter a descriptive note about where media will be
stored in the text box labeled Location where
media will be stored .
The Vault's catalog will be updated with this
information. Should data on this unit of media be
required for retrieval, a media request alert (including
the location note) will be displayed by the Information
Repository, prompting an administrator to load the
required media.
204
204
205