Buffalo Surveillance Server, Руководство администратора

Страница: 235 / 404

Manage Data and the Information Repository: Data Service Policies and Vault Admin 235
Prepare Media
IMPORTANT NOTE: If you are using the Buffalo Surveillance Server Vaults and media are
preconfigured and prepared automatically; there is no need to perform any Vault operations. The
information in this Vault Admin section is provided for information only.
Use the Prepare Media window to add and load new media to your Information Repository.
Prepare Media enables you to set all of the parameters required to prepare a unit of media for
use by a Buffalo Surveillance Server Vault. Some of these parameters cannot be changed
unless you
reformat the media . The Prepare Media window is slightly different for each type
of media.
Before you can prepare media, you must already have Vaults added to your Buffalo
Surveillance Server Information Repository. See the
Buffalo Surveillance Server Configuration
sections for information and directions for adding Vaults. The Vault to which you want to add
media must be
unsecured before any media preparation will be permitted.
When executing Vault and media operations, the Buffalo Surveillance Server may appear
as if it is not responding. However, when the Buffalo Surveillance Server completes its
given task, it responds normally.
Follow the steps below to prepare media.
In the left pane of the Vault Admin window, click in front of the Vault to add media.
Select the media's name next to the Media icon .
Click in the Vault Admin tool bar . The Prepare Media window appears:
The options in the Prepare Media window are based on the media type of the Vault
selected. For example, if the Vault is being prepared for data tape media, then tape
media options display. If the Vault is being prepared for hard disk media, the Prepare
window will display options for disk media.
243
345
209
204
205