Buell XB9R 2003, Руководство по обслуживанию, Страница: 115 / 566

2-10 2003 Buell XB9R: Chassis
HOME
DISASSEMBLY
Bearing Removal
NOTE
On single disc wheels, always remove the brake disc side
first. If the wheel has two brake discs, remove the left bearing
first.
1. See Figure 2-7. Remove wheel bearings using BUSH-
ING AND BEARING PULLER (Part No. B43993-7) and
WHEEL BEARING REMOVER AND INSTALLER (Part
No. HD-44060).
2. Sparingly apply Extreme Pressure Lubricant (J-23444-A)
to the threads of the short forcing screw (1) to prolong
service life and ensure smooth operation.
3. Assemble the short forcing screw (1), nut (2), Nice bear-
ing (3), washer (4) and bridge (5) from the Wheel Bear-
ing Installer/Remover (HD-44060).
4. See Figure 2-8. Insert the Front Wheel Bearing Remover
Collet (B-43993-7) into the wheel bearing until it fully
seats against the bearing.
5. Insert the ball bearing into the collet.
6. See Figure 2-9. Thread the puller assembly (1) into the
collet (2).
7. Hold the collet (2), and turn the forcing screw (3) to
expand the collet.
8. See Figure 2-10. Place the bridge (1) against the wheel
hub.
9. Hold the forcing screw (2), and turn the nut (3) clockwise
until the bearing is free of the hub.
Figure 2-7. Assemble Puller
i04277
1. Short forcing screw
2. Nut
3. Nice bearing
4. Washer
5. Bridge
3
1
2
4
5
Figure 2-8. Install Collet and Ball Bearing
Figure 2-9. Expand the Collet
i04276
Ball bearing
Collet
i04278
1
2
1. Puller assembly
2. Collet
3. Forcing screw
3