Installation
7
Logano plus SB615 - Technical specifications are subject to change without prior notice.
12
z
Place rear thermal insulation panel against rear of boiler
to fit over protrusions and fix to side thermal insulation
jacket on both sides using 4 spring clips.
z
Fit front cross-member (with trapezoid cutout facing
down) so that the 2 holes match up with the bolts at the
top and fix with nuts.
z
Fit rear cross-member (with trapezoid cutout facing
down) so that the 2 holes match up with the bolts at the
top and fix with nuts.
z
Position the top flange of the side members in the cut-
out in the front and rear cross-members. Fix with 2 self-
tapping screws, placed through the hole at the front
and the slot at the rear.
Fig. 5
Fixing rear thermal insulation
7 747 015 037-05.1RS
Fig. 6
Positioning and fixing front and rear cross-members
USER NOTE
The edge flanges on the cross-members
must face outwards and the front and rear
cross members must be horizontal and level
with each other.
Fig. 7
Locating and fixing the side members
7 747 015 037-13.1RS
