Bticino MH08CT/GB, Техническое руководство

Страница: 62 / 156

60
my Home - control
table
Possible function
Combination of key covers used/Configurator in M1 and M2
ON control ON —
OFF control OFF —
Timed ON control 2) 1 to 8 —
Dimmer - ON control (upper key) — O/I
OFF (lower key) + adjustment
1)
Cyclical ON-OFF control and adjustment
1)
no configurator —
Rolling shutter up-down to end of stroke —
Monostable rolling shutter up-down — M
Pushbutton (ON monostable) PUL —
Activation of scenarios managed by the programmer MH200 3) CEN
1) If the control is sent to a dimmer actuator.
2) For operating times and description see the table for the device item L4651/2.
3) If the device is used only to manage the scenario programmer MH200, do not configure positions A2, PL2.
Made up of two independent controls, on the back the device has two
distinct positions
M1 and M2 .
If the device is to be used for just one control, configure only the positions
for control 1 (positions
A1 , PL1 and M1 ). If instead two separate controls
are to be generated, configure the positions of control 1 and control 2
independently.
PL1
A
M1
A2
PL2
M2
position M1
control 1 control 2
control 1 control 2
front view
upper pushbuttons
lower pushbuttons
LED
control 1
control 2
BUS
rear view
position M2
configurAtion
control item H/l4652/2 and item Am5832/2
→
→
→
→
operAting mode