Bticino MH08CT/GB, Техническое руководство

Страница: 94 / 156

92
my Home - control
tecHnicAl feAtures
scenario programmer item mH200
The device, installed in a MY HOME system, runs the scenarios previously
programmed with the TIMH200 software, supplied with the CD provided with
the device. Installing the scenario Programmer item MH200 requires just the
connection to the power supply and to the MY HOME Automation bus (see
instruction sheet); some types of system which can be made are shown
below.
technical features
Installation: in switchboards for DIN modular devices
Connection network: Automation system Bus
Power supply: 12 Vdc not polarised with item 392100
Maximum absorbed current : 200mA
Operating temperature: +5 to +40°C
Programming: with Personal Computer
Mechanical features: 1 2-way connector for power supply;
1 2-way connector for SCS bus;
1 6-pole male connector for
connection to Personal Computer by means
of interface cable item 3559 (not supplied).
Connection to the basic system
A/PL =11 99
M =
CEN
Connection to the PC serial port
Reset key
State
indication
LED
Ethernet network
connector Automation
BUS
Power supply
12V d.c.
BUS BUS
2 2