Bticino MH08CT/GB, Техническое руководство

Страница: 66 / 156

64
my Home - control
Fitted with a knob and a central pushbutton this device is suitable for the
enhanced management of dimmer actuators and Sound systems (SPE = 1,
see Sound system guide).
The central pushbutton switches the dimmers controlled with times (soft-
start and soft-stop) and switching on level (from 1-99%) which can be set by
configuration of the device itself ON and OFF.
The rotary knob instead accurately adjusts the controlled power from the
minimum to the maximum value (also for GEN, AMB and GR controls).
configurAtion
Knob control item Hc/Hs/l/n/nt4563
A room
PL/PF light point/voice point
M
mode
LIV1 adjustment level 10 to 90
LIV2 adjustment level 1 to 9
SPE Automation mode – configurator 0
I address of the device to be controlled
(see table 1 for details)
Automation Mode SPE = 0 (enhanced dimmer functions)
Can switch a dimmer actuator ON, selecting the level from 1% to 99% and
the soft-start and soft-stop speed, according to the table given below;
the times given refer to the maximum level.
The knob regulates on 99 levels.
Possible function Configurator in M Configurator in LIV1 (tens) Configurator in LIV2 (unit)
ON-OFF cyclic with selection of soft-start 1 to 9 0 to 9 0 to 9
and soft-stop speed (see table 2)
If LIV1=LIV2=0 the load switches ON
at the last level saved
ON-OFF cyclic with switching ON
- 0 to 9 0 to 9
at the level from 1-99%. If LIV1=LIV2=0 the load
switches ON at the last level saved
Sound system Mode SPE = 1
See Sound system Technical Guide for details
Mode Automation SPE = 2 (Basic dimmer functions)
Can switch a dimmer ON, selecting the level from 1 to 9. If M = 0 the load
switches ON at the last level saved. Unlike the mode with SPE=0 the knob
regulates on 9 levels.
Possible function Configurator in M Configurator in LIV1 (tens) Configurator in LIV2 (unit)
ON-OFF cyclic with switching ON 0 to 9 - -
at the level from 1-9
1) Address of the device to control:
Configurator in I
Address
1 to 9 Systems with logical extension. Address of interface item
F422 on whose BUS the dimmer to be driven is found
0 The dimmer is found in the same system as the knob
control
CEN Systems with logical extension. The dimmer is found in
the riser BUS and the knob control in one of the con-
nected systems
2) Start/stop time:
Configurator in M
Time
0 default
1 1 sec.
2 3 sec.
3 5 sec.
4 10 sec.
5 20 sec.
6 40 sec.
7 1 min.
8 2 min.
9 4 min. and 15 sec.
Front view item HC/HS4563
Rear view
Configurator
housing
Knob -
Pushbutton/LED
PL/PF
A
M
LIV1
LIV2
SPE
I