Bticino MH08CT/GB, Техническое руководство

Страница: 132 / 156

130
GENErAL ruLES FOr INSTALLATION MY HOME - CONTrOL GENErAL ruLES FOr INSTALLATION
uSAbLE CAbLE
The sheathed, non-shielded, twisted telephone pair or the red BTicino SCS
pair for Burglar-alarm system (item L4669S) should be used to connect the
device. The power supply, the operating signals and the alarm signals are
distributed through this pair.
Interrupting or sabotage of the connections
causes an immediate system alarm.
The BTicino pair (item L4669) is 300/500V insulated and therefore can be
tubed with 230V a.c. cables
Red SCS cabl
for burglar-alarm
system (item L4669S)
bACK-up bATTErY
Connect the battery item 3507/6 to the connector in the compartment
on the back of the dialling device, after the battery has been put in the
compartment itself and then connect to the BUS, to avoid the battery
discharging uselessly.
Back-up battery connection
pOSITION IN THE SYSTEM
The telephone dialling device must be the first component of the internal
telephone system: it must be connected immediately downstream of the line
Example of the connection of the telephone dialling device inside a home.
protection fuses and of the surge arrester.
item 3507/6
9hfX
FheZX
TeeXfgXe
7\T__\aZWXi\VX
9Tk GX_Xc[baX
£ Ó Î
{ x È
Ç n ™
ä
"
SCS cable
item L4669
GENErAL ruLES FOr INSTALLATION - burglar-alarm control
unit with pSTN or GSM dialling device