98 / 150
Manual PRO50-150 V.2
The water flow reaching the
sensor holders is unstable
and the flow regulator is not
operating.
Stabilize pressure in the piping where
samples are taken for the sensor
holders and check the flow regulator.
There are air bubbles in the
measuring zone of the sensor
Bleed the sensor holder and ensure
that there is no air remaining in the
measuring zone.
6 GUARANTEE AND SERVICE
This unit is guaranteed for a period of 3 years in control main unit.
The electrolysis cells have a control of two years, as long as they have
not exceeded 10,000 hours of use (10K models) and 5.000 hours (5K
models).
This guarantee is given to the owner of the equipment and it is not
transferable. All chlorinators are checked at the factory before packing. If any
electrical or mechanical problems occur within 24 months from purchase, owing
to unlikely malfunctioning or to faulty components, the parts will be repaired or
changed. A part will not be changed unless the faulty component is returned.
This guarantee does not cover damage caused by corrosion, excess damp,
current, temperature or vibration, or by incorrect installation, unsuitable
handling, overvoltage, accidents or any other cause beyond the operation of the
equipment.
In the event of an equipment failure, it should be returned to the manufacturer
or distributor. Transport costs will be covered by the equipment owner.
It is important to bear in mind that all repairs under guarantee are
performed at the factory, or by an authorized BSV Electronic technical
service.
