83 / 150
Manual PRO50-150 V.2
The time between cleaning (in hours) can be adjusted depending on the water
hardness of your swimming pool.
It is possible to select cleaning intervals from 1 to 8 hours.
4.1.4.4
Volume of the swimming pool
Configure the volume of your swimming pool in m3, if the equipment is to work
in semi-automatic mode. The daily chlorination time will be calculated based on
this parameter and the water temperature.
Whenever the value is changed, on exiting the menu the screen will display the
minimum filtering time the pump should work.
If at the end of the day, the filtering pump operates for less time than
stipulated by the equipment for an optimum level of chlorine in the water, the
equipment will display a warning message.
4.1.4.5
Location of the swimming pool
Attention: This work mode only affects the semi-automatic operation
mode.
The swimming pool may be installed outdoors or indoors. Function changes
between INDOOR and OUTDOOR when the OK key is pressed.
With this function, the equipment automatically reduces production to ½ if it is
an indoor pool to avoid excess chlorine.
4.1.4.6- Cover
The equipment may detect the presence of a cover on the swimming pool
(only for automatic covers)
. In this case, it is only necessary to place the
limit switch of the cover in the terminal block, as indicated in the section on
electrical installation.
On placing the cover, the chlorinator automatically reduces production to 20%.
This variation will be reflected in the production %, and the letter "C" will be
