86 / 150
Manual PRO50-150 V.2
4.1.5- Chlorine menu
With this menu you can select all parameters related to chlorine production.
4.1.5.1- Production of cl.
Configuration of the maximum production of chlorine.
From 0% to 100% Press “OK” and use the arrows
to change the value.
Press "OK" to confirm the adjustment.
Note: Chlorine production may be limited regardless of the operation mode
(manual, automatic...) that is selected.
4.1.5.2- Adjustment of the set value (Max. ORP or Max. PPM)
ORP Mode
in which a Redox probe (OPTIONAL) is installed.
In this case, adjust the oxidation potential to the required level. For private
swimming pools that are not used frequently, 650 mV is a sufficient value 700
mV is the suitable value for the majority of swimming pools. Press "OK" to
confirm the adjustment. However, the best way to adjust the optimal ORP value
is to analyze the water and determine the ratio between ORP and PPM, because
there are some differences between several types of water.
NOTE: if working in automatic, you can also adjust the production percentage
from 0% to 100%,
PPM Mode
in which a free chlorine probe (OPTIONAL) is installed.
In this case, adjust the value in ppm as required. A value between 1ppm and
1.5ppm is correct.
NOTE: if working in automatic, you can also adjust the production percentage
from 0% to 100%,
On connecting the equipment in automatic mode, the ORP/PPM value
will flash for 5 min before the equipment starts to produce chlorine.
