72 / 150
Manual PRO50-150 V.2
3.2.6- NTC/1 kit (OPTIONAL) for PRO equipment
The temperature probe kit enables you to take a reading of the water
temperature. Once the probe has been connected, the temperature will be
displayed in the main screen.
By installing this kit, you will also be able to use the semi-automatic control
mode. More details on this mode can be found on page 60 of this manual.
3.2.7
CONDUCTIVITY Kit
The Conductivity Kit from BSPOOL performs a continuous
measurement of your Swimming pool’s water
chloride. It is
specially suitable to work with salt water chlorination Systems,
and it will allow to know the salt concentration in the water, and
also the electrolysis cell condition.
This sensor is been designed to work with BSPOOL Systems
exclusively. In order to confirm the compatibility with your
BSPOOL chlorinator model, please, ask to your distributor.
3.2.7.1
Technical characteristics
-
Sensor technology: Inductive, with temperature compensation
-
Measurement range: 0 to 10g/l
-
Resolution: 0,1g/l
-
Supply: 12V DC
3.2.7.2
Installation
3.2.7.2.1
Hydraulic installation
-
This sensor must be installed after your Swimming pool’s
filter, before the electrolysis cell. The mínimum distance
between the sensor and the electrolysis cell is 50cm.
-
Install a 1”1/4 flange (not supplied)
according with the pipe
diameter where it will be installed.
