Bruno SRE-2700, Руководство по установке

Страница: 17 / 57

©2004,2002 BRUNO INDEPENDENT LIVING AIDS, INC.®
17
SRE-2700 06-11-2004
INSTALLATION
INSTALLATION
If threaded fastener
extends below a stair
tread that is exposed, it
can be trimmed flush
with pliers.
5) Frequently check the measurements at the key
locations indicated to ensure proper positioning
of the clamp assemblies.
rail
foot clamp assembly
approx.
2" above
nosing
*see note below
*Install foot clamps at least 2-1/2” from wall (approx. 4" between the back
edge of the rail and the wall). Provide additional foot clamp-to-wall
clearance if seat needs to swivel against wall.
Bruno ships the Stairway
Elevator with fasteners
appropriate for
wooden stair treads only .
Other stair material may
require different fasteners.
Please contact Bruno
Independent Living Aids, Inc.
for information.
For installations on hardwood
stairs, Bruno recommends
drilling a pilot hole before
inserting fasteners.
INSTALLATION NOTES