Bruno SRE-2700, Руководство по установке

Страница: 16 / 57

©2004,2002 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-2700 06-11-2004
16
2) For ease of installation, finger tighten all
clamp assemblies to rail. The clamp
assembly should be positioned so the nut
is closest to the wall.
3) Slide top and bottom clamps down on the rail
until firmly seated on step. When installing on
carpeted stairs, use a rubber mallet on the
clamps to compress carpet and pad before
anchoring to steps.
4) Drill in one screw in the foot nearest the wall
of each of the top and bottom of foot of clamp
assemblies.
This will enable the installer to change the
position of the rail if necessary and minimize
the number of holes drilled in the wrong location.
INSTALLATION
Bruno recommends installing the screws in the
back clamp (the one closer to the wall) first,
then the screws in the front of the clamp.
INSTALLATION ON CARPET
Before securing the foot clamp
assemblies with hardware, seat them
using a deadblow hammer. Use a
rubber mallet to compress the rug and
pad before anchoring the clamp.