Bruker QUANTAX EDS, Руководство пользователя, Страница: 55 / 119

5.3 Image Capture QUANTAX EDS
55
5.3 Image Capture
This section describes how to capture electron microscope images with the ESPRIT software.
Step Example/hints
1
Select a workspace ( Objects, Line scan,
Mapping, or Imaging ).
These workspaces allow capturing an EM
image.
2
Use the icon in the bottom left
corner of the
Scan
configurator to open
the
SCAN CONFIGURATION
dialog.
3 Set image resolution (pixel).
The parameters in steps 3, 4, and 5 affect the
total
Image capture time .
4 Set dwell time [µs].
5 Set line average.
6
Click and set image contrast
and brightness on the microscope.
Use histogram settings and oscilloscope
overlay tools if needed.
7
Click on the button to
set capture parameters and Image
number or Automatic numbering.
The image will have the name set in the
Sample configurator. Choose Single to
acquire one image frame,
Continuous
to
update image frames or Sliding average to
average a number of frames.
8
an image.
9 Image legend parameters can be edited
using the icon.
The image name can also be changed here
after capture.
10 Toggle between two image channels if
available.
Note that the image channel names can be
changed in the System workspace under
Microscope to e.g. SE, BSE, HAADF… (see
section 4.7.6).
11
Use the image chart icon to
a) Save image
b) Add image to project Alternatively, click with the right mouse
button into the image or drag and drop it to
Project
or
Report
. To perform image
processing, refer to section 5.6.
c)
Add
image
to report.