Bruker QUANTAX EDS Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 119

Bruker QUANTAX EDS Скачать руководство пользователя страница 37

4.5 Configurator Bar

QUANTAX EDS

37

Fig. 4.5-16 Enabling detector segments

Cooling mode.

The XFlash

®

detectors can be

operated in

Thermostat

mode, where the Peltier

cooling operates at constant temperature (default
setting) or in

Maximum

cooling

mode, where the

Peltier cooling operates at full power.

Detector segments.

If the detector has multiple

segments  (or if several  detectors were installed as
such),  only one  EDS  configurator is shown in the
configurator  bar. In this case the detectors or
detector segments are listed as

Detector segments

.

The individual detectors can be selected by enabling
the respective checkboxes in the detector segments
list.

Multiple detectors.

Multiple detectors can be

registered with individual configurators. In this case,
parameters of the spectrometers have to be set
individually. When multiple detectors are used,
activate the detectors by clicking on the
corresponding configurators.

Motorized detector axis.

If the EDS detector is

equipped with a motorized axis, the

icon in the

bottom left corner of the EDS configurator (see Fig.
4.5-17) displays and controls the position of the EDS
detector. The icon shows one of the two states:

The EDS detector is inserted and is at measurement
position, if the

icon is displayed. The system is

ready for use. When clicking on the icon in this
status, the message

Detector will be moved to

park position

pops up and after confirming with OK,

the detector will be retracted.

The EDS detector is retracted and in park position, if
the

icon is displayed. When clicking on the icon

in this status, the message

Detector will be moved

to acquisition position

pops up and after clicking on

OK, the detector moves to the measurement
position.

4.5.6

Additional
Configurators

If additional detectors or X-ray sources are attached,
their configurators are displayed in the configurator
bar.

EDS detector(s).

If additional EDS detectors are

used, the parameters of each individual detector can
be set in the individual configurators. For details see
also the XFlash

®

Reference Manual.

«
...
35
36
37
38
39
...
»

Содержание QUANTAX EDS
























































































































Отзывы:

Нет отзывов