Bruker minispec mq20 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 86

Bruker minispec mq20 Скачать руководство пользователя страница 7

About This Manual

E1400912_1_001

7

1

About This Manual

This manual enables safe and efficient handling of the device.

This manual is an integral part of the device, and must be kept in close proximity to the
device where it is permanently accessible to personnel. In addition, instructions concerning
labor protection laws, operator regulations tools and supplies must be available and adhered
to.

Before starting any work, personnel must read the manual thoroughly and understand
its contents.

Compliance with all specified safety and operating instructions, as well as local

work safety regulations, are vital to ensure safe operation.

The figures shown in this manual are designed to be general and informative and may not
represent the specific Bruker model, component or software/firmware version you are
working with. Options and accessories may or may not be illustrated in each figure.

1.1

Policy Statement

It is the policy of Bruker to improve products as new techniques and components become
available. Bruker reserves the right to change specifications at any time.

Every effort has been made to avoid errors in text and figure presentation in this publication.
In order to produce useful and appropriate documentation, we welcome your comments on
this publication. Support engineers are advised to regularly check with Bruker for updated
information.

Bruker is committed to providing customers with inventive, high quality products and services
that are environmentally sound.

1.2

Symbols and Conventions

Safety instructions in this manual are marked with symbols. The safety instructions are
introduced using indicative words which express the extent of the hazard.

In order to avoid accidents, personal injury or damage to property, always observe safety
instructions and proceed with care.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in
death or serious injury.

This is the consequence of not following the warning.

1. This is the safety condition.

u

This is the safety instruction.

«
...
5
6
7
8
9
...
»

Содержание minispec mq20























































































Отзывы:

Нет отзывов