Bruker minispec mq20 Скачать руководство пользователя страница 56

Страница: 56 / 86

minispec.exe Software for Diagnostic and Service Purposes

E1400912_1_001

8.3.3

The Edit Menu

The list of commands in the

Edit

pull-down menu depends on the active window (see figure

below). In the following description all commands are included to ensure a complete
documentation.

Figure 8.6: The Edit Pull-Down Menus for Different Active Windows

In the figure above, the left side shows the menu when the Signal Window is active, and the
right side when the Results Window is active.

The Copy Command (Copy as Data, Copy as Bitmap)

Use this command to copy selected data into the clipboard. This command is not available if
no data is selected. In the case of signals, data are copied as x-, y- (, z-) data in ASCII
format, to allow an easy transfer to Excel. Use

Copy as Bitmap

from the

Edit

menu to copy

signals as bitmap to the clipboard.

Shortcut Keys: CTRL+B (Copy as Bitmap)

Shortcut Keys: CTRL+C (Copy as Data)

The Select All Command

Selects the entire content of the Result Window. In the Signal Window this command is only
valid in connection with calibrations.

Shortcut Keys: CTRL+A

The Unselect All Command

Unselects the entire content of the Result Window. In the Signal Window this command is
only valid in connection with calibrations.

Shortcut Keys: CTRL+U

The Erase All Command

Erases the entire content of the Result Window, without erasing the data from the
corresponding automatically saved measured data file.

Shortcut Keys: Del

The Find Command

Use this command for searching and highlighting words or text fragments.

Shortcut Keys: CTRL+F

Содержание minispec mq20























































































Результаты поиска

Содержание minispec mq20

Отзывы:

Bruker minispec mq20, Руководство пользователя, Страница: 56 / 86

Результаты поиска

Содержание minispec mq20

Отзывы: