Bruker minispec mq20 Скачать руководство пользователя страница 16

Страница: 16 / 86

Transport, Packaging and Storage

E1400912_1_001

Do not Damage Air-tight
Packaging

The packaging is air-tight. Damage to the
barrier layer may render the contents
unusable.

Do not pierce.

Do not use sharp objects to open.

Component Sensitive to
Electrostatic Charge

The packaging contains components which
are sensitive to an electrostatic charge.

Only allow packaging to be opened by trained
personnel.

Establish potential equalisation before
opening.

Protect from Heat

Protect packages against heat and direct
sunlight.

Protect from Heat and
Radioactive Sources

Protect packages against heat, direct sunlight
and radioactive sources.

Table 3.1: Symbols on the Packaging

3.2

Inspection at Delivery

Upon receipt, immediately inspect the delivery for completeness and transport damage.

Proceed as follows in the event of externally apparent transport damage:

• Do not accept the delivery, or only accept it subject to reservation.

• Note the extent of the damage on the transport documentation or the shipper's delivery

note.

• Initiate complaint procedures.

Note:

Issue a complaint in respect to each defect immediately following detection. Damage

compensation claims can only be asserted within the applicable complaint deadlines.

Содержание minispec mq20























































































Результаты поиска

Содержание minispec mq20

Отзывы:

Bruker minispec mq20, Руководство пользователя, Страница: 16 / 86

Результаты поиска

Содержание minispec mq20

Отзывы: