manualshive.com logo in svg

Bruker minispec mq20, Руководство пользователя, Страница: 68 / 86

Поделиться
Скачать
Bruker minispec mq20 Скачать руководство пользователя страница 68

minispec.exe Software for Diagnostic and Service Purposes

68

E1400912_1_001

Marker Cursor

 on / off. Use the mouse or the cursor keys to position the data cursor. You

can observe data point information (and the distance from the fitted value) in the Status Bar.
The field is only active if a calibrated data file for the application exists.

Note:

 Zooming, data, distance and marker cursors can only be used exclusively.

The Welcome Box Command

On the BRUKER minispec program start, the software wakes up with the Welcome Box (see
also section Configuration of the Software, the Welcome Box). The Welcome Box offers the
possibility  of  adapting  some  software  settings  to  the  user’s  purposes  (e.g.  selecting  a
minispec  application  or  connecting  a  minispec).  To  switch  off  the  Welcome  Box,  uncheck

Display  this  Window  on  Startup

  in  the  Welcome  Box.  On  restarting  BRUKER  minispec

software,  the  last  minispec  connection  and  minispec  applications  will  be  reloaded
automatically.  One  can  deselect  loading  the  minispec  application  after  program  start  via
switching  off  the  option 

Load  Application  on  Startup

  in  the  Welcome  Box.  You  can  also

switch on / off the Welcome Box by marking / unmarking the 

Welcome Box

 command in the

View

 menu.

The Large Font Result Box Command

The  information  in  the  Result  Window  can  be  displayed  using  two  different  font  sizes.
Marking this entry you will choose the larger font.

The Diagnostics View Command

With this command a window is opened up which displays various information for diagnostic
purposes.  These  options  are  helpful  for  checking  the  instrument  status,  connections,  and
commands. Different diagnostics are available, depending on the active window. The transfer
of the diagnostic information from the minispec to the PC, and the display in the Diagnostics
View  needs  time  and  system  resources,  thus  this  command  can  be  used  to  regulate
performance as required.

Note:

 To ensure a failure-free operation use these options only for diagnostic purposes and

not in the background for standard measurements. Unmark Diagnostics View and all
diagnostic possibilities when they are not any longer required!

The Pulse Ram Diagnostics Command

This  command  is  only  available  if  the  Editor  Window  is  active.  If  you  mark  this  command,
information  is  printed  about  the  pulse  pattern  of  the  NMR  pulse  sequence  into  the
Diagnostics View.

The Connection, Commands and Suppress Status Diagnostics Commands

If  Connection  Diagnostics  is  marked,  information  will  be  printed  about  the  connection
between the minispec software and the minispec connected. With 

Commands Diagnostics

,

information will be printed about the data exchange into the Diagnostics View. Some status
information about the hardware is requested every second. These requests take also place if
the status has not changed during the last interval. For a clear and easy diagnostic it may be
useful to suppress the printing using the command 

Suppress Status Diagnostics

.

Содержание minispec mq20























































































Отзывы:

Нет отзывов