manualshive.com logo in svg

Bruker AVANCE, Руководство пользователя

Поделиться
Скачать
Bruker AVANCE Скачать руководство пользователя страница 23

System Components

H157655_1_008

23

3.5

Other Optional Components

1

2

3

4

Figure 3.4: Other Options for AVANCE Systems

1.

SampleCase

 is a 24 sample, random-access, automation system that fits almost

all shielded Bruker standard bore magnets.

2.

SampleJet

 is a robot which has been consciously designed to meet growing

demand for simplicity, versatility and higher throughput in NMR sample tube
automation.

3.

SampleXpress

 allows automatic measurement of NMR samples with Bruker

NMR spectrometers. SampleXpress is controlled by TopSpin or IconNMR, and is
equipped with integrated barcode reader registration, which is under control of
SampleTrack.

4.

The 

imaging accessory

 cabinet houses the gradient amplifiers for micro-

imaging applications.

5.

An optional UPS (not shown) is highly recommended and may vary based on
the system configuration.

Содержание AVANCE















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды