ENGLISH OUS indications
Page 20 of 50
OTH-SEM-IFU-OUS-0359 Rev I
Figure 10 Provizio SEM Scanner Splash Screen
Touching the Settings button ( ) enters the setting and configuration screens, allowing the
user to configure the wireless and other settings of the scanner.
Touching the Language button(
) will allow you to change language.
After a few seconds the scanner will progress forward in the workflow.
Sleep mode
During a period of inactivity, the unit may turn dark in sleep mode to save power. In sleep mode,
the unit will not obtain readings and the screen will be off.
A scanner in sleep mode may be brought back to action mode by pressing the action button. If a
scanning session was underway, the scanner will return to the screen the user was last on and
resume operation from that point.
Install the Single-Use Sensor - S only
This section is applicable only to the Provizio SEM Scanner S.
Use a new, unopened single-use sensor per patient, per session to prevent cross-
contamination of patients. Multiple anatomic locations may be scanned using the same
sensor in one session. Make sure, however, that a new sensor is used for each new
session. A session is defined as scanning the sacrum, left heel and the right heel for the
same patient.
The sensor installation screen (Figure 11) will be displayed, prompting the installation of the
single-use sensor.
