Operating Instructions 125 MAX DD2
Seite/page 85/100
Ausgabe/edition 01/2006
Gear ratio 2nd gear
Number of teeth of
primary drive gear
gear ratio
Traditional gear
ratio
(in sprocket
sizes)
theoretical max. speed
(in km/h / mile/h)
(at 12.500 r.p.m. and wheel
diameter 870 mm /
34,25 in.)
32
65
6,52
14 to 91
100 / 62
33
64
6,23
14 to 87
105 / 65
34
63
5,95
14 to 83
110 / 68
35
62
5,69
14 to 79
115 / 72
36
61
5,44
14 to 76
120 / 75
37
60
5,21
14 to 73
125 / 78
38
59
4,98
15 to 75
131 / 81
3,21
gear ratio of 2nd gear (cannot be changed)
Number of teeth of
secondary drive gear
¡
Note:
To facilitate the change of gear ratio it is recommended to carry for each gear ratio a
clutch drum with a pre-assembled primary drive gear and the respective secondary
gear.
¡
Note:
To allow easier matching of primary and secondary gears please note: The sum of
the last digits of the teeth number must always be 7 or 17 (3
5
/ 6
2
).
4.3. Exchange of gear reduction ratio
The exchange of the gear ratio seems at first glance to be more complicated than you are used to.
If however you follow the hints below you will notice that the work involved is not much different.
¨
Lift engine side of the kart and place the vehicle at an angle of approx. 80° (this
prevents loss of oil from the gearbox).
¨
Remove the right rear hub with wheel.
¨
Remove the gear cover by unscrewing 6 Allen screws M6x30 (pos. 4).and the 4
Allen screws M8x70 (pos. 30). (Fig. 18)
¡
Note:
If the gear cover is difficult to remove, it can be levered off at the separating lugs.
¨
Remove the primary drive gear (pos. 5)
(screwed to clutch drum) and secondary gear
(pos. 6) and fit the gear pair of your choice.
(Fig. 17)
¡
Note:
To allow fast exchange of gear ratios we
recommend you to carry in stock various pre-
assembled clutch drums with the respective
primary drive gears.
At re-assembly proceed in reverse sequence. Tighten the
screws to the following torque settings:
M6:
10 Nm (88 lbf. in.)
M8:
22 Nm (195 lbf. in.)
Fig. 17
Содержание 125 MAX DD2
Страница 26: ...Betriebsanleitung 125 MAX DD2 Seite page 26 100 Ausgabe edition 01 2006 Q SILASTIC 732 RTV Bild 13...
Страница 63: ...Operating Instructions 125 MAX DD2 Seite page 63 100 Ausgabe edition 01 2006 Fig 8...
Страница 70: ...Operating Instructions 125 MAX DD2 Seite page 70 100 Ausgabe edition 01 2006 Q SILASTIC 732 RTV Fig 13...