Brother XL-2121, Руководство по эксплуатации

Страница: 25 / 63

KNOWING YOUR SEWING MACHINE —————————————————————————————————————————
24
6
Put the thread behind the guide above the
needle.
7
Thread the needle from front to back leaving a
thread tail of about 5 cm (2 inches).
1 Needle holder
• If your sewing machine is equipped with a
needle threader, use the needle threader to
thread the needle. (See page 24)
1 5 cm (2 inch)
Note
●
If the thread take-up lever is lowered, the
upper thread can not be wrapped around
the thread take-up lever. Make sure you
raise the Presser Foot Lever and the thread
take-up before you feed the upper thread.
●
If you incorrectly feed the thread you may
cause sewing problems.
Using the Needle Threader (Models
equipped with a needle threader)
Turn the power switch to ‘O’.
1
Lower the presser foot lever.
2
Turn the balance wheel toward you
(counterclockwise) to raise the needle holder
to the highest position.
1 Needle holder
2 Needle threader lever
Note
●
When you use the needle threader, make
sure the needle holder is in the highest
position, otherwise the hook may be
damaged.
3
While lowering the needle threader lever,
hook the thread onto the guide.
1 Needle holder
2 Needle threader lever
3 Guide
1
1
2
1
1
2
3