Brother XL-2121 страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 63

background image

1

IMPORTANT SAFETY INSTRUCTIONS

When using this machine, basic safety precautions should always be taken, including the following:

Read all instructions before using.

DANGER

-

To reduce the risk of electric shock:

1. The machine should never be left unattended while plugged in. Always unplug the machine

from the electrical outlet immediately after using and before cleaning.

2. Always unplug the machine before you change the light bulb.

Replace the bulb with same type rated 15 watts.

WARNING

-

To reduce the risk of burns, fire, electric shock, or injury to persons:

1. Do not allow this machine to be used as a toy. Close attention is necessary when the machine is

used by or near children.

2. Use this machine only for its intended use as described in this manual. Use only accessories

recommended by the manufacturer as contained in this manual.

3. Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has

been dropped or damaged, or dropped into water. Return the machine to the nearest authorized
dealer or service center for examination, repair, electrical or mechanical adjustment.

4. Never operate the machine with any air openings blocked. Keep ventilation openings of the

machine and foot control free from the accumulation of lint, dust, and loose cloth.

5.  Never drop or insert any object into any opening.
6.  Do not use outdoors.
7.  Do not operate where aerosol (spray) products are being used or where oxygen is being

administered.

8. To disconnect, turn the main switch to the symbol “

{

” position which represents off, then

remove plug from outlet.

9. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the machine needle.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14. Switch the machine to the symbol “

{

” position to turn it off when making any adjustments in the

needle area, such as threading needle, changing needle, threading bobbin, or changing presser
foot, and the like.

15. Always unplug the machine from the electrical outlet when removing covers, lubricating, or

when making any other user servicing adjustments mentioned in the instruction manual.

16. This sewing machine is not intended for use by young children or infirm persons without

supervision.

17. Young children should be supervised to ensure that they do not play with this machine.

SAVE THESE INSTRUCTIONS

This machine is intended for household use.

«
1
2
3
4
...
»

Содержание XL-2121
































































Отзывы:

Нет отзывов

Похожие инструкции для XL-2121

Бренд: Janome Страницы: 48

Бренд: Janome Страницы: 102

Бренд: Janome Страницы: 6

Бренд: Janome Страницы: 40

Horizon Memory craft 7700 QCP

Бренд: Janome Страницы: 5

Horizon MC8900 QCP Special Edition

Бренд: Janome Страницы: 112

Бренд: Janome Страницы: 4

Бренд: Janome Страницы: 17

Continental M7 Professional

Бренд: Janome Страницы: 51

Бренд: Janome Страницы: 88

Бренд: Janome Страницы: 32

Бренд: Janome Страницы: 2

Бренд: Janome Страницы: 7

Бренд: Janome Страницы: 79

Бренд: Janome Страницы: 41

Бренд: Janome Страницы: 38

Memory Craft 3500

Бренд: Janome Страницы: 2

Бренд: Matrix Fitness Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды