Brother XL-2121, Руководство по эксплуатации

Страница: 22 / 63

21
1
5
Replace the bobbin cover. Put the left tab in
place (see arrow
1 ), and then press lightly on
the right side (see arrow 2 ) until the cover
clicks into place.
• Replace the cover so that the end of the
thread comes out from the left side of the
cover (as shown by the line in the diagram).
Lower Threading (For One-touch
lower threading)
This is only available on certain models.
1
Raise the needle to its highest position by
turning the balance wheel toward you
(counterclockwise) and raise the presser foot
lever.
2
1
●
Setting the bobbin improperly may cause the
thread tension to loosen, breaking the needle
and resulting in injury.
1 Wound evenly
2 Wound poorly
●
The bobbin was designed specifically for
this sewing machine. If bobbins from older
models are used, the machine will not
operate correctly. Use only the enclosed
bobbin or bobbins of the same type
(part code: SA156, SFB (XA5539-151)).
●
Be sure to turn off the power. If you
accidentally step on the foot controller
and the machine begins to operate, injury
could result.
CAUTION
1
2
Actual size
This model Older model
11.5 mm
(7/16 inch)
CAUTION