Brother XL-2121 страница 11 Скачать руководство пользователя | Manualshive

Страница: 11 / 63

background image

KNOWING YOUR SEWING MACHINE

—————————————————————————————————————————

10

USING YOUR SEWING MACHINE

Connecting Plugs

1

Connect the power cord plug into the
machine.

2

Connect the power supply plug into a wall
outlet.

Note

●

When leaving the machine unattended, the
main switch of the machine should be
switched off or the plug must be removed
from the socket-outlet.

●

When servicing the machine, or when
removing covers or changing bulbs, the
machine must be unplugged.

(For U.S.A. only)

●

This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug.
If it still does not fit, contact a qualified
electrician to install the proper outlet. Do
not modify the plug in any way.

●

Use only regular mains household electricity for the power source. Using other power
sources may result in fire, electric shock, or damage to the machine.

●

Turn off the main power and remove the plug in the following circumstances:
• When you are away from the machine
• After using the machine
• When the power fails during use
• When the machine does not operate correctly due to a bad connection or a disconnection
• During electrical storms

●

Do not use extension cords or multi-plug adapters with many other appliances plugged in to
them. Fire or electric shock may result.

●

Do not touch the plug with wet hands. Electric shock may result.

●

When unplugging the machine, always turn off the main power first. Always grasp the plug to
remove it from the outlet. Pulling on the cord may damage the cord, or lead to fire or electric
shock.

●

Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted,
or bundled. Do not place heavy objects on the cord. Do not subject the cord to heat. These
things may damage the cord and cause fire or electric shock. If the cord or plug is damaged,
take the machine to your authorized dealer for repairs before continuing use.

●

Unplug the power cord if the machine is not to be used for a long period of time. Otherwise a
fire may result.

WARNING

CAUTION

«
...
9
10
11
12
13
...
»

Содержание XL-2121
































































Отзывы:

Нет отзывов

Похожие инструкции для XL-2121

Бренд: Janome Страницы: 88

Бренд: Duerkopp Adler Страницы: 35

Бренд: Matrix Fitness Страницы: 26

Бренд: UnionSpecial Страницы: 96

Бренд: Bartell Global Страницы: 16

Бренд: Sagem Страницы: 44

Бренд: W6 Страницы: 48

Бренд: MyBinding Страницы: 3

Memory Craft Compulock II

Бренд: Janome Страницы: 38

Бренд: EuroLite Страницы: 32

Бренд: Castelle Страницы: 5

13” Blazer MP

Бренд: NCL Страницы: 8

Бренд: Furuno Страницы: 21

Бренд: Singer Страницы: 61

Бренд: Oki Страницы: 653

Бренд: Singer Страницы: 30

Бренд: Janome Страницы: 34

Denim Pro BL 18

Бренд: Baby Lock Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды