Brother XL-2121, Руководство по эксплуатации

Страница: 12 / 63

11
1
Main Power and Sewing
Light Switch
This switch turns the mains power and sewing light
on or off.
1 Turn on (toward the ‘I’ mark)
2 Turn off (toward the ‘O’ mark)
Foot Controller
When you press the foot controller down lightly, the
machine will run at a low speed. When you press
harder, the machine’s speed will increase. When you
take your foot off the foot controller, the machine
will stop. You should make sure that nothing is
placed on the foot controller when the machine is
not in use.
1
Foot controller
Note
(For U.S.A. only)
●
Foot Controller: Model N
This foot controller can be used for Model
XL-2121, XL-2125, XL-2230.
.
Checking the Needle
The sewing needle must always be straight and sharp
for smooth sewing.
■
To Check the Needle Correctly:
Put the flat side of the needle on a flat surface.
Check the needle from the top and the sides.
Dispose of any bent needles safely.
1 Parallel space
2 Level surface (bobbin cover, glass, etc.)
●
Do not allow pieces of cloth and dust to
build up on the foot controller. Doing so
could cause a fire or an electric shock.
2
1
1
CAUTION
1
2