APPENDIX
277
7
f
Align the holes on the embroidery frame
holder with the pins in the frame-mounting
plate of the carriage.
1
Pins in the frame-mounting plate
2
Holes on the embroidery frame holder
g
Secure the embroidery frame holder with
the two thumb screws.
1
Use the thumb screws included with the machine
(thumb screws removed in step
a
on page 265).
Additional digitizing information
When creating a pattern for embroidering with a
cap frame, pay attention to following points in
order to avoid registration problems (misalignment
of gaps in the pattern).
a
Sew underlay stitches.
b
Start the embroidery pattern from the
center, and sew toward the ends.
With the machine, the order in which patterns are
selected when they are combined is the order in which
they will be sewn. For the following example, select
the patterns in the order “E”
→
“A”
→
“B”
→
“R” to
make the combined pattern “BEAR”.
CAUTION
• Using the disc-shaped screwdriver included,
firmly tighten the thumb screws.
Incorrect
sewing
order
Correct
sewing
order
Note
• Do NOT sew from one end to the other,
otherwise wrinkling or shrinking may occur.
Содержание 884-T13
Страница 54: ...52 Continuing to the embroidering settings screen a Press The embroidering settings screen is displayed ...
Страница 148: ...146 ...
Страница 245: ...APPENDIX 243 7 f Attach the embroidery frame removed in step d and then finish embroidering the appliqué ...
Страница 308: ...306 If any of the following messages appear consult your nearest authorized Brother dealer ...