Brother 884-T13, Руководство по эксплуатации

Страница: 145 / 316

EMBROIDERING SETTINGS
143
4
Normally, the machine automatically assigns thread colors to the needle bars; however, a specific thread
color can be manually assigned to a certain needle bar. If a needle bar is specified, that needle bar is
removed from the machine’s automatic assignments and the specified color remains assigned to it.
By specifically assigning often used thread colors to certain needle bars, the trouble of changing the
thread spools can be reduced.
Also, the maximum sewing speed can be specified to the assigned needle bar. It is useful when you
specially set a weak thread such as a metallic thread to the assigned needle bar.
Once a manual needle bar setting is specified, it
remains applied until the setting is cancelled.
The manual needle bar settings can be specified in
page 3 of the settings screen.
a
Touch , and then touch and to
display page 3 of the settings screen.
b
Touch any of the key from to for the
number of the needle bar that you wish to
specify.
1
Indicates the number of the selected needle bar
c
Select the color to be assigned to the needle
bar.
Touch , , and , or directly touch a
color, to select the desired color.
1
The color that appears enlarged is the color that is
selected.
2
Displays the color that is selected and its name
3
Highlighting a color square moves in the direction
of the arrow on the key that is touched.
Reserved Needle Bar and Sewing Speed Settings
Note
• This feature is not accessible through the embroidering screen.
• You can assign thread colors up to 9 needle bars in normal mode. When you set “Manual Color
Sequence” to “ON” in settings screen, it is available to assign up to 10 needle bars. If you assign all
the 10 needle bars in the “Manual Color Sequence” mode, and then you set the machine to the normal
mode, the setting of needle bar 10 is canceled automatically.
Refer to “Selecting/Managing Thread Colors for Each Needle Bar (Manual Color Sequence)” on
page 132
1
2
1
3