27 |
EN
Brose Battery 630
//
Charger
//
Commissioning
17 Troubleshooting charger
INFORMATION
The charger is maintenance-free. If
the charger is faulty or if faults occur
that cannot be rectified by restarting,
please contact an authorized Brose
dealer.
The contact information for authorized
Brose dealers can be found in the
Service area at:
INFORMATION
If the battery temperature or voltage
is outside the specified range, the
charging process stops.
If the battery temperature or the battery
voltage is within the specified working
range again, the charger automatically
continues charging.
The LED on the charger flashes red
when an error occurs.
1. Disconnect the charger from the
mains supply and allow it to cool
down in a cool place.
2. Restart the charging process.
›
To do so, the charger must be
completely disconnected from the
battery and power supply for at
least 15 seconds.
LED indicator
F67261
G01767
Standby
Charging
Charging
completed
Error
lights up permanently
flashing
quick flashing