Brose F67261, Оригинальная инструкция по эксплуатации

Страница: 22 / 36

EN | 22 Commissioning // Brose Battery 630 // Charger
13 Displays and controls
13.1 Charge level key
› fig. B, page 3
The Charge level key (11) on the battery
is intended ONLY for checking the
charge level of your battery
(see chap.
13.2 on page 22) .
The Brose Drive System cannot be
switched on with it.
The charge level is also shown on the
display of the control unit.
Read and follow the user manual of the
corresponding control unit.
INFORMATION
Depending on the design of your
e-bike, the Charge level key
(11)
and
the charge level indicator (12) may not
be visible.
Information can be found in the e-bike
manufacturer’s instructions.
13.2 Charge level indicator
› fig. B, page 3
Riding
Four green LEDs on the charge level
indicator
(12)
show the battery charge
level.
If you press the Charge level key
(11) on
the battery, the battery charge level is
displayed for about 5 seconds.
Each constantly illuminated LED
corresponds with about 25% capacity.
If the battery capacity is below 10%, the
first LED on the charge level indicator
flashes.
LED charge level indicator (riding)
76~100%
51~75%
26~50%
11~25%
0~10%