EN
| 8
About these original operating instructions
//
Brose Battery 630
//
Charger
These original operating instructions – referred to as the user manual in the
following – is based on the standards and regulations applicable in the European
Union and contain important information on the use of Brose components.
About these original operating instructions
1 Additionally applicable documents
This user manual is part of the original
operating instructions for the Brose
Drive System.
The complete original operating
instructions consist of all documents
relating to the individual components of
the Brose Drive System installed in your
e-bike.
The component configuration for the
Brose Drive System installed in your
e-bike can be found in the included data
sheet of the e-bike manufacturer.
You absolutely must read and observe
the following:
· The operating instructions of the
e-bike manufacturer
· The user manuals of supplementary
components of the Brose Drive
System
· The user manuals for additional and
special equipment
2 Reading and storing the user manual
Read the user manual, especially the
safety advice in the following chapters,
carefully before using components of
the Brose Drive System.
This user manual contain information for
the safe and fault-free use of the battery
and corresponding charger for the Brose
Drive System.
This user manual does not contain any
instructions for operating the complete
Brose Drive System (information on this
topic can be found in the additionally
applicable documents).
· Keep the user manual at hand for
further use by all users.
· If you hand over your e-bike or
individual components of the Brose
Drive System to third parties, always
include the pertinent operating
instructions and all additionally
applicable documents.
