Bronpi Dama Hydro, Инструкция по установке, эксплуатации и обслуживанию

Страница: 34 / 120

33
Button Description Mode Performance description
5 Decreases power
ON/OFF Decreases the output value of the thermo-stove.
MENU Moves to the previous menu option.
PROGRAMMING Goes back to the previous submenu value.
6 Increases power
ON/OFF Increases the output value of the thermo-stove.
MENU Moves to the following menu option.
PROGRAMMING Moves to the following submenu option.
NOTE : You can get access into menu from the remote control but you have to approach to the display to see the content of it.
9.4 MENU OPTION
Pressing button nº 3 of display we can access to the MENU. It is divided into different sections and levels that allow access to the thermo-
stove configuration and programming.
The access to the technical programming of the boiler is protected by a password. These parameters should be modified only by an
authorised technician. (The changes in these parameters could cause incorrect operation of the thermo-stove and the subsequent loss of its
warranty.)
9.4.1 USER MENU
The following table briefly describes the menu structure in the thermo-stove. In the attached table, only the options available to the user are
specified.
Menu Submenu
01 - Clock adjustments
01- Day
02- Hour
03- Minute
04- Day
05- Month
06- Year
02 - Programme setting ** See point 10.4.3.
03 - Select Language
01 - Italian
02 - French
03 - English
04 - German
05 - Portuguese
06 - Spanish
04- Stand-by Mode ON/OFF
05 - Sound mode ON/OFF
06 - Initial load Set
07 - Stove State Provides information on the status of the thermo-
stove.
9.4.2 MENU 1. CLOCK
The clock sets the time and date. To set up the clock you have
to move through the different submenus and introduce the data,
changing values with buttons 1 and 2. The card has a lithium battery
that allows the clock to work for 3/5 years ( see drawing D29 ).
9.4.3 MENU 2. PROGRAMME ADJUSTMENT (TIMETABLE SCHEDULE OF THE THERMO-STOVE)
IMPORTANT NOTE : Before starting the set up of the thermo-stove, please check that the time and date shown are correct this becomes vital
for the default settings of the programmes. Otherwise, the selected programming would be set up depending on the time and date set and
this may be incorrect for you.
The following table briefly describes the programming menu structure in the boiler or thermo-stove and where options can be selected.
MENU Sub-menu 1. Sub-menu 2. VALUE
02 - Programme setting
1- Set up chrono
01- Set up chrono ON/OFF
2- Daily programme
01 - PROG daily ON/OFF
02- Start 1 Day Hour
03- Stop 1 Day Hour
04- Start 2 Day Hour
05- Stop 2 Day Hour
3- Weekly programme
01 - PROG Weekly ON/OFF
D29
06
Menu 01
MONTH
CLOCK
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS HYDRO SERIES
EN