background image

MODEL

 1600 

N

-C

 W

 H

High Valley Stoves 

by

 Stoll

185 Highway 201 

 Abbeville, SC 29620

M

 1600 T

-V

 

 C

 I

 L

M

 1600 R

-V

 

 P

Safety No  ce:

If this wood heater is not properly installed, a house 

fi

 re may result.

For your safety, please carefully read and follow the installa  on direc  ons.  Contact the local Building Inspector, 
Fire O

  cial, or other Authority Having Jurisdic  on (AHJ) about code requirements, restric  ons, and installa  on 

inspec  on in your area.  The AHJ can advise you if you are required to obtain a permit before installa  on.

Failure to follow these instruc

Ɵ

 ons can result in property damage, bodily injury, or even death.

Owner’s Manual

Safety, Installa  on, Opera  on, & Maintenance Guidelines

INSTALLER:

  

Leave this manual with the individual (s) responsible for opera  ng this wood heater.

OPERATOR: 

 

The Owner’s Manual contains important safety, opera  ng, and maintenance informa  on.  

Please read and understand the en  re Owner’s Manual before installing or opera  ng this wood heater.  
If you have ques  ons please contact your High Valley Dealer for assistance.

DO NOT DISPOSE OF THIS MANUAL

SAVE THIS OWNER’S MANUAL FOR FUTURE REFERENCE

Содержание 1600

























Отзывы: