background image

4

Thank you for choosing a wood heater from High Valley Stoves.  Safe and e

  cient opera  on of your wood heater depends 

greatly on proper installa  on as outlined in this owner’s manual.  If this wood heater is not properly installed, a house 

fi

 re may 

result.  To reduce the risk of 

fi

 re follow all instruc  ons, cau  ons, and safety no  ces contained herein.  Installa  on must also 

meet all State and Local Code requirements and/or restric  ons.  Check with your local Building O

  cial, Fire O

  cial, or other 

Authority Having Jurisdic  on (AHJ) regarding the need to obtain a permit prior to installing a wood heater; and whether an 
inspec  on of the installa  on is required upon comple  on.  Understand that code requirements and follow-up inspec  on are 
not put in place to make the installa  on process more di

  cult.  Rather they are designed to help ensure your safety.  Don’t 

take shortcuts, use or allow makeshi   methods, or other compromises in the installa  on.  Safety is paramount and the key to 
enjoying your new wood heater.  We strongly recommend installa  on by an experienced professional installer who has the 
specialized knowledge, tools, and equipment to complete the installa  on safely.  Look for an installer who is cer  

fi

 ed by the 

The Na  onal Fireplace Ins  tute (NFI) as a Woodstove Specialist or Master Hearth Professional (MHP) to have demonstrated 
their mastery of the knowledge required in all phases of safe woodstove installa  on, and of best current industry prac  ces.  
Be sure to contact your insurance company to inquire whether they have addi  onal requirements.

BURN SOLID WOOD FUEL ONLY. 

 This wood heat-

er is designed and approved for the burning of cord 
wood fuel only.  Burning any type of fuel other than 
cord wood in this wood heater is against all safety test-
ing and will void all warran  es.

DO NOT USE CHEMICALS OR FLUIDS TO START 
THE FIRE.

 

 

Never use gasoline, gasoline-type lantern 

fuel, kerosene, charcoal lighter 

fl

 uid, or similar liquids 

to start or “freshen up” a 

fi

 re in this wood heater. Keep 

all such liquids well away from the heater at all   mes.  
Storing these or other 

fl

 ammable liquids near a wood 

heater could cause a 

fi

 re.

DO NOT BURN GARBAGE OR FLAMMABLE FLU
IDS SUCH AS GASOLINE, NAPHTHA OR ENGINE 
OIL.

  

Cord wood is the only fuel approved for use in 

this wood heater.

DO NOT CONNECT THIS UNIT TO A CHIMNEY 
FLUE SERVICING ANOTHER APPLIANCE.

DO NOT CONNECT A WOOD HEATER TO, OR 
USE IN CONJUNCTION WITH, ANY AIR DISTRI
BUTION DUCTWORK UNLESS SPECIFICALLY 
APPROVED FOR SUCH INSTALLATIONS.

DO NOT OPERATE IN AN EXTREME MANNER 
AS TO OVER FIRE THE WOOD HEATER.

  If any 

part of the wood heater, the chimney, or the chimney 
connector glows, you are over-

fi

 ring.  If over-

fi

 ring oc-

curs, close all combus  on air controls immediately.  
Over-

fi

 ring can cause damage to the wood heater and 

may cause a 

fi

 re.

HOT WHILE IN OPERATION.  KEEP CHILDREN, 
CLOTHING, AND FURNITURE WELL AWAY. 

 

CONTACT MAY CAUSE SKIN BURNS.

  

Observe all 

minimum clearances as listed in this manual.  Maintain 
a 36” area around the wood heater to be kept free of 
combus  ble materials including furniture and window 
treatments.  

DO NOT

 allow una  ended children in the 

area of an opera  ng wood heater.

BURN DIRECTLY ON FIRE BRICKS.

   

Do not use 

grates, andirons, or other methods to support fuel. 

FUEL STORAGE.

  

Store bulk cord wood covered in a 

well ven  lated area to ensure that the wood fuel is as 
dry as possible.  Do not store wood fuel within wood 
heater minimum clearances or within the space need-
ed for loading the heater or for ash removal.

ASH DISPOSAL.

  Ashes should be placed in a steel 

container with a   ght-

fi

    ng lid and moved outdoors 

immediately. The closed container of ashes should be 
placed on a non-combus  ble 

fl

 oor or on the ground, 

well away from all combus  ble materials, pending 

fi

 nal 

disposal. If the ashes are disposed of by burial in soil or 
otherwise locally dispersed, they should be retained in 
the closed container un  l all cinders have thoroughly 
cooled. Other waste shall not be placed in this con-
tainer.

CREOSOTE FORMATION & REMOVAL.

  Inspect 

chimney connector and chimney twice monthly, and 
clean if necessary.  Creosote accumula  on in the con-
nector pipe, chimney, or 

fl

 ue lining can create an ex-

tremely hot 

fi

 re if ignited.

S

 P

G

 S

 I

Содержание 1600

























Отзывы: