manualshive.com logo in svg

Brocade Communications Systems MLXe-16, Руководство по установке

"Brocade Communications Systems MLXe-16 - высокопроизводительный коммутатор для сетей. Установочное руководство доступно для бесплатного скачивания на нашем сайте. Здесь вы найдете все необходимые инструкции по установке и настройке этого мощного оборудования. Скачайте руководство сейчас с manualshive.com."

Поделиться
Скачать
background image

422

Brocade MLX Series and Brocade NetIron XMR Hardware Installation Guide

53-1002373-02

Cautions

C

CAUTION 

Make sure the flash card is empty or does not contain files you want to keep. Formatting a 
flash card completely erases all files on the card.

VORSICHT 

Stellen Sie sicher, dass die Flash-Karte leer ist oder keine Dateien auf ihr gespeichert sind, 
die Sie behalten möchten. Die Formattierung einer Flash-Karte löscht alle Dateien auf der 
Karte.

MISE EN GARDE 

Vérifiez que la carte mémoire est vide ou ne contient pas de fichiers que vous voulez 
conserver. Le reformatage de la carte mémoire efface tous les fichiers qui s'y trouvent.

PRECAUCIÓN 

Verifique que la tarjeta flash esté vacía o que no contenga archivos que desee conservar. 
Al formatear una tarjeta flash todos los archivos de ésta se borran.

CAUTION 

Never leave tools inside the chassis.

VORSICHT 

Lassen Sie keine Werkzeuge im Chassis zurück.

MISE EN GARDE 

Ne laissez jamais d'outils à l'intérieur du châssis.

PRECAUCIÓN 

No deje nunca herramientas en el interior del chasis.

CAUTION

Once you start the formatting process, you cannot stop it. Even if you enter CTRL-C to stop 
the CLI output and a new prompt appears, the formatting continues. Make sure you want 
to format the card before you enter the command.

VORSICHT 

Wenn Sie mit dem Formattieren beginnen, können Sie diesen Prozess nicht anhalten. 
Selbst wenn zum Anhalten der CLI-Ausgabe Strg-C drücken und eine neue Aufforderung 
gezeigt wird, wird mit dem Formattieren fortgefahren. Stellen Sie sicher, dass Sie die Karte 
formattieren wollen, bevor Sie den Befehl eingeben.

MISE EN GARDE 

Une fois le processus de formatage commencé, vous ne pouvez pas l'interrompre. Même 
si vous appuyez sur CTRL-C pour arrêter la sortie CLI et si une nouvelle invite apparaît, le 
formatage continue. Soyez bien sûr de vouloir formater la carte avant d'entrer la 
commande.

PRECAUCIÓN 

Una vez que empiece con el proceso de formateado, no se puede detener. Incluso si pulsa 
CTRL-C para detener la salida de CLI y aparece un nuevo indicador, el formateado 
continuará. Esté seguro que desea formatear la tarjeta antes de introducir el comando.

CAUTION 

Use the erase startup-config command only for new systems. If you enter this command on 
a system you have already configured, the command erases the configuration. If you 
accidentally do erase the configuration on a configured system, enter the write memory 
command to save the running configuration to the startup-config file.

VORSICHT 

Verwenden Sie den Befehl "Erase startup-config" (Löschen Startup-Konfig) nur für neue 
Systeme. Wenn Sie diesen Befehl in ein bereits konfiguriertes System eingeben, löscht der 
Befehl die Konfiguration. Falls Sie aus Versehen die Konfiguration eines bereits 
konfigurierten Systems löschen, geben Sie den Befehl "Write Memory" (Speicher 
schreiben) ein, um die laufende Konfiguration in der Startup-Konfig-Datei zu speichern.

MISE EN GARDE 

N'utilisez la commande erase startup-config que pour les nouveaux systèmes. Si vous 
entrez cette commande sur un système que vous avez déjà configuré, elle efface la 
configuration. Si vous effacez la configuration par accident sur un système configuré, 
entrez la commande write memory pour enregistrer la configuration actuelle dans le 
fichier startup-config.

PRECAUCIÓN 

Use el comando erase startup-config (borrar configuración de inicio) para sistemas nuevos 
solamente. Si usted introduce este comando en un sistema que ya ha configurado, el 
comando borrará la configuración. Si usted borra accidentalmente la configuración en un 
sistema ya configurado, introduzca el comando write memory (escribir memoria) para 
guardar la configuración en ejecución en el archivo startup-config.

Содержание MLXe-16





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MLXe-16

jbc DI Series Manual preview
DI Series
Бренд: jbc Страницы: 4
GE TLE Scalable 150 Quick Start Manual preview
TLE Scalable 150
Бренд: GE Страницы: 6
GE SIMON XT Instruction Manual preview
SIMON XT
Бренд: GE Страницы: 3
GE NetworX Series Installation And Start-Up Manual preview
NetworX Series
Бренд: GE Страницы: 80
GE PACSystems* RX3i Application Manual preview
PACSystems* RX3i
Бренд: GE Страницы: 39
GE PACSystems* RX3i Secure Deployment Manual preview
PACSystems* RX3i
Бренд: GE Страницы: 35
GE PACSystems* RX3i Important Product Information preview
PACSystems* RX3i
Бренд: GE Страницы: 3
GE PACSystems* RX3i User Manual preview
PACSystems* RX3i
Бренд: GE Страницы: 169
GE PACSystems RX7i Reference Manual preview
PACSystems RX7i
Бренд: GE Страницы: 317
M-system SC100 Series Applications Manual preview
SC100 Series
Бренд: M-system Страницы: 103
M-system MSP40 Instruction Manual preview
MSP40
Бренд: M-system Страницы: 18
M-system 47LV Specifications preview
47LV
Бренд: M-system Страницы: 7
Olsberg OEC Instructions For Use Manual preview
OEC
Бренд: Olsberg Страницы: 68
Yamaha disklavier DKC-850 Quick Start Manual preview
disklavier DKC-850
Бренд: Yamaha Страницы: 2
ZKTeco C5S110 Installation And Connection Manual preview
C5S110
Бренд: ZKTeco Страницы: 6
Eaton SCD24 Installation Manual preview
SCD24
Бренд: Eaton Страницы: 8
ABB RHDE250 Operating Instruction preview
RHDE250
Бренд: ABB Страницы: 44
Omega CNI16D Quick Start preview
CNI16D
Бренд: Omega Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды