Broadxent BritePort 8012-V1 страница 9 Скачать руководство пользователя | Manualshive

Страница: 9 / 57

background image

User Manual

BritePort 8012-V1

7

version of this agreement shall apply to Software acquired in the EU. This Agreement is the
entire agreement between us, and you agree that Broadxent will not have any liability for
any untrue statement or representation made by it, its agents or anyone else (whether
innocently or negligently) upon which you relied upon entering this Agreement, unless such
untrue statement or representation was made fraudulently.

Safety & Regulatory Information

The following sections contain notices for various countries:

CAUTION: This device is intended to be connected by the user to a CSA/TUV/UL
certified/listed IBM AT or compatible personal computers in the manufacturer’s defined
operator access area. Check the equipment operating/installation manual and/or with the
equipment manufacturer to verify/confirm if your equipment is suitable for devices to be
connected to it.

ATTENTION: Ce périphérique est destiné à être connecté par l’utilisateur à un ordinateur
IBM AT certifié ou listé CSA/TUV/UL ou compatible, à l’intérieur de la zone d'accès
définie par le fabricant. Consulter le mode d’emploi/guide d'installation et/ou le fabricant de
l’appareil pour vérifier ou confirmer qu'il est possible de connecter d'autres périphériques à
votre sytème.

Notice for the USA

FCC Part 15: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, this notice is not a guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the distance between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.

Consult the dealer or an experienced radio/TV technician.

Caution

To comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC
Rules, this device must be installed in computer equipment certified to comply with the
Class B limits.
All cables used to connect the computer and peripherals must be shielded and grounded.
Operation with non-certified computers or non-shielded cables may result in interference to
radio or television reception.

«
...
7
8
9
10
11
...
»

Содержание BritePort 8012-V1


























































Отзывы:

Нет отзывов

Похожие инструкции для BritePort 8012-V1

TALON UDC SERIES

Бренд: Kantronics Страницы: 101

Бренд: Comtech EF Data Страницы: 206

Бренд: XRadio Страницы: 18

Mini LTE modem & mount

Бренд: VR Expert Страницы: 6

Бренд: Cyta Страницы: 20

Бренд: AU Страницы: 3

Бренд: NetComm Wireless Страницы: 60

MultiModem MT2834ZDX Series

Бренд: Multitech Страницы: 8

Бренд: SafeNet Страницы: 54

Бренд: Patton electronics Страницы: 13

Бренд: LG Innotek Страницы: 20

Бренд: Huawei Страницы: 9

Бренд: Kathrein Страницы: 16

MultiModemII MT5600BR-V92

Бренд: Multitech Страницы: 8

MultiModem Cell MTCBA-C1

Бренд: Multitech Страницы: 29

Бренд: Multitech Страницы: 21

MultiConnect MTCM

Бренд: Multitech Страницы: 2

MultiConnect rCell 100 Series

Бренд: Multitech Страницы: 70

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды