User Manual
BritePort 8012-V1
24
4.
In the “Local Area Connection Properties” dialog
box that appears (Figure 4-11), in the
“Components checked are used by this
connection” box, select Internet Protocol
(TCP/IP) and click the Properties button.
5.
The “Internet Protocol (TCP/IP) Properties” dialog
box appears (Figure 4-12).
(a) For Dynamic IP Address:
If your service provider uses Dynamic Host
Configuration Protocol (DHCP), then in Figure
4-12 select the option Obtain an IP address
automatically and click OK. This completes the
Ethernet configuration, therefore skip the
remaining steps.
(b) For Static IP Address:
If your service provider does not use DHCP, then
in Figure 4-12 select the option Use the following
IP Address. Fill the IP Address, Subnet mask
and Default Gateway fields according to the
values provided by your service provide. Then
select Use the following DNS server addresses and fill the Preferred DNS server and
Alternate DNS Server fields. Click OK to close the window.
6.
On the “Local Area Connection Properties” window (Figure 4-11), click OK to complete the
Ethernet configuration.
Congratulations! You have successfully completed the network configuration in your computer.
Figure 4-11
Figure 4-12