30
User Manual
BritePort 8012-V1
Using the Status Option
The Status option provides valuable information about your BritePort 8012-V1 and your DSL service
setup. It consists of DSL Connection, and Diagnostic Test. While you are in the Status section, all
pages are automatically refreshed approximately every 30 seconds.
DSL Connection
The DSL Connection provides the basic techni-
cal details about the DSL communication
between your DSL service provider to your Brite-
Port 8012-V1.
The data is generated based on the Current DSL
Line Mode, which is set in DSL Configuration
under the Advanced Setup. Information shown
in the table includes Speed, Latency, CRC
Error, Up Time, etc, as similar to figure 3-6.
Diagnostics Tests
The Diagnostic Test allows you to ping the
Default Gateway and Primary DNS as well as
testing the connections of your BritePort
8012-V1 to both LAN and WAN networks. This
feature provides the convenience for
troubleshooting when you work with a complex
LAN environment and/or are required to manage
your DSL network at a remote location.
Running the Diagnostic Test will help you to
identify the possbile causes of your DSL network
problems. Refer to figure 3-6, to run the test, click the Test button next to each category. The test
result will show under the Result column.
Figure 3-6
Figure 3-7