BRINKMANN PUMPS Bplogic, Руководство по эксплуатации

Страница: 122 / 291

5 Operating the pump controller
122 bplogic intelligent pump controller 18/02/2021
Description
THEN com-
mand
(Fig. 66/2) A THEN command must be defined for each action.
If the condition checked by the IF command is true, the THEN
command is executed.
The THEN command triggers one of the ten commands: “Copy”,
“Write”, “Generate event”, “Go to action”, “Add”, “Subtract”, “Multi-
ply”, “Divide”, “Reset lead time timer” and “Reset run-on time
timer”. You can select which command is executed for each ac-
tion.
ELSE com-
mand
(Fig. 66/3,
optional) An ELSE command can be defined for each action.

If the condition checked by the IF command is false and an
ELSE command is defined, the ELSE command is executed.

If the condition checked by the IF command is false and no
ELSE command is defined, no command is executed.
The ELSE command triggers one of the ten commands: “Copy”,
“Write”, “Generate event”, “Go to action”, “Add”, “Subtract”, “Multi-
ply”, “Divide”, “Reset lead time timer” and “Reset follow-up time
timer”. You can select which command is executed for each ac-
tion.