BRINKMANN PUMPS Bplogic, Руководство по эксплуатации

Страница: 124 / 291

5 Operating the pump controller
124 bplogic intelligent pump controller 18/02/2021
Description
THEN value The THEN value is a value that the THEN command uses to edit
the target parameter if the condition defined for executing a com-
mand is true.
The way in which the THEN command edits the THEN value and
the target parameter depends on the command that was exe-
cuted. If the “Write” command is executed as in the example, the
THEN command writes the THEN value to the target parameter.
You can define up to 6 different THEN values for each action.
Each command can edit up to 6 target parameters with up to 6
different THEN values. The number of THEN values must corre-
spond to the number of target parameters.
ELSE value The ELSE value is a value that the ELSE command uses to edit
the target parameter if the condition defined for executing a com-
mand is false.
The way in which the ELSE command edits the ELSE value and
the target parameter depends on the command that was exe-
cuted. If the “Write” command is executed as in the example, the
ELSE command writes the ELSE value to the target parameter.
You can define up to 6 different ELSE values for each action.
Each command for which the ELSE command is defined can edit
up to 6 different target parameters with up to 6 different ELSE
values. The number of ELSE values must correspond to the num-
ber of target parameters.
Comparison
variable A comparison variable is a value that is set as the IF value for an
action.
You can define the following values as the comparison variable:

A free value that you entered

Any parameter from the parameter list

A marker