BRINKMANN PUMPS Bplogic, Руководство по эксплуатации

Страница: 168 / 291

5 Operating the pump controller
168 bplogic intelligent pump controller 18/02/2021
I/O
-mo
d
u
le
_
co
n
fi
g
u
ra
ti
o
n
-g
e
n
e
ra
l.
p
n
g
Fig. 97:
“I/O selection”
4. Navigate as follows depending on the required settings:

Fig. 96/1:
“I/O selection”
(Fig. 97, general specifications for the I/O mod-
ules, pre-set by the manufacturer)

The settings are pre-configured by the manufacturer.

Check that the settings are correct before commission-
ing for the first time.

If there are problems with the configuration, contact
customer service:

When doing so, provide the current configuration file

Section 7.2.1
“Backup and restore
preparation
”
on page 249.
Or:

Have the pump controller’s order number and serial
number at hand.
 “Customer service”
on page 8

Fig. 96 /2
–
3:

Section 5.6.1.1
“
Setting parameters for digital inputs and
outputs
”
on page 169

Fig. 96 /4:

Section 5.6.1.4
“
Setting actuator parameters
”
on page 179

Fig. 96 /5: scroll in order to display additional frequency converters