BRINKMANN PUMPS Bplogic, Руководство по эксплуатации

Страница: 110 / 291

5 Operating the pump controller
110 bplogic intelligent pump controller 18/02/2021
Process sequence

Sa
w
-t
o
o
th
-cycl
e
-mo
d
e
_
se
q
u
e
n
ce
-0
1
.p
n
g
Fig. 58: Saw tooth cycle mode sequence
1 Filling
The return tank’s fill level increases if the pump’s
speed is low.
2 Upper fill level
See “Boost” (Fig. 58/3)
3 Boost
When a defined upper fill level is exceeded, the
pump switches to overload mode in order to pre-
vent the return tank overflowing (boost).
4 Emptying
The return tank’s fill level reduces while the pump
pumps the return tank empty at a high speed
5 Sleep
When a defined lower fill level is not reached, the
pump switches off (sleep).
6 Lower fill level
See “Sleep” (Fig. 58/5)
7 Active phase The saw tooth cycle mode phase that is currently
running is coloured blue in the application single
view’s right display area.