BRINKMANN PUMPS Bplogic, Руководство по эксплуатации

Страница: 119 / 291

5 Operating the pump controller
18/02/2021 bplogic intelligent pump controller 119
Command Description
Divide The command divides the value of the corresponding target
parameters by up to 6 freely-selectable values or by the
parameter values from up to 6 parameters in the parameter
list.
Reset lead time
timer

The command stops the expiration of the lead time timer
for up to 6 different actions.

The command resets the timer for the stopped lead
time.
Reset follow-up
time timer

The command stops the expiration of the follow-up timer
for up to 6 different actions.

The command resets the timer for the stopped follow-up
time.
The following terms apply to this:
Description
Source parameters
Source parameters are used as the source for the “Copy”
command or as comparison values.
You can select up to 6 source parameters for each action.
All parameters in the parameter list and all of the logic mod-
ule’s markers can be source parameters.
Target parameters
Target parameters are processed by the “Write”, “Copy”,
“Add”, “Subtract”, “Multiply” and “Divide” commands. The
value of a target parameter is the result of an action.
You can select up to 6 target parameters for each action. All
parameters in the parameter list and all of the logic module’s
markers can be target parameters.