Bras Is-Cream, Руководство по обслуживанию

Страница: 38 / 48

I s - C r e a m
38
12. 7 REPLACING THE GEAR MOTOR AND BELT
1
Loosen the socket-head screw of the belt-motor retaining bracket, then use a tube spanner to unscrew the screws of the bracket
positioned under the plate surface. Unscrew and now remove the socket-head screw that was loosened previously.
2
Unscrew the 6 pulley support screws, positioned as follows : 2 lower, 2 central and 2 upper.
3
Now pull out the pulley support, toothed belt and then the gear motor.
12. 8 BELT TENSION ADJUSTMENT
1
Fix the screws located under the frame without tighten them..
2
Set the tension of the belt using the screw located on the gear motor support. Turning it clockwise the tension of the belt is