manualshive.com logo in svg

Brainlab CRANIAL/ENT OPTICAL TRACKING, Руководство пользователя прибора

Поделиться
Скачать
Brainlab CRANIAL/ENT OPTICAL TRACKING Скачать руководство пользователя страница 70

How to Assemble and Attach the Skull Reference Base

①

②

③

④

⑤

⑥

⑦

⑧

Figure 30  

Step

1.

Disinfect the area on the patient where the 

Skull Reference Base

 will be attached.

NOTE: Position the device so that it does not hinder the surgeon and provides the cam-
era an unobstructed view of the array at all times. Additionally, ensure that there is suffi-
cient bone density for placement.

 

2.

Attach the array connector interface 

⑦

 to the base 

③

 (in the direction of the arrow), using

the adjustment nut 

⑧

 to securely fasten it.

3.

Make an incision in the patient through which the tube 

①

 will be inserted.

4.

Insert the tube into the base through the bottom (in the direction of the arrow), and care-
fully fasten the tube cap nut 

⑥

 on top.

5.

Place the assembled 

Skull Reference Base

 onto the patient’s skull and insert the tube

into the incision.

6.

Insert a 

Disposable KLS Martin Bone Fixation Screw 1.5 mm x 6 mm

 

⑤

 through the

tube.

7.

Use the screwdriver to completely screw the screw into the bone until it is secure. Do not
apply excessive downward pressure, otherwise injury or hardware damage may occur.

NOTE: If the tube you are using has a window, loosen the screw about half a turn coun-
terclockwise. This facilitates easier removal of the device at the end of the procedure.

 

Assembly and Attachment

70

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

Содержание CRANIAL/ENT OPTICAL TRACKING

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды